All Exhaust

Exhaust systems have always been the base for aftermarket performance. From the beginner starting off to the high horsepower racer, who need to comply to track sound requirements, a well engineered exhaust system will enhance performance, sound, appearances, and economy. Upgrading restrictive factory exhaust with a tuned straight-through GReddy and GPP Exhaust System will increase horsepower & torque, add a deep sporty exhaust note, give style & flare to the look of your car, all while increasing fuel efficiency.
  *Please check your local state and county laws regarding vehicle modification, before purchasing.

                                                            *WARNING: Cancer & Reproductive Harm
www.P65warnings.ca.gov





Car Make Car Model Car Year Description PART #
Mitsubishi Evolution X 2008-14

GReddy Revolution RS Exhaust

10138103
Car Make: Mitsubishi
Car Model: Evolution X
Car Year: 2008-14
Notes:

The Revolution RS for the Mitsubishi EvoX features full non-tapered 3” diameter piping. Perfect to be used with optional 3” downpipe. The lightweight single sided cat-back exhaust shaves over 20lbs off the car. The design still maintains good sound levels and quality with a large resonator and extra-long RS muffler. Classic GReddy styling positions the muffler and tip stylishly underneath the car while matching the profile body-lines perfectly. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:   CZ4A
Engine:   4B11T
Type:   single-sided cat-back system (R)

Number of pieces:  2
Piping:   76mm (3")
Tip:   115mm (4.5")  x L170mm (6.7")   or non-removable (early model)
Gasket(s):    3" oval (qty: 1 included) replacement
Resonator:   Yes

Notes: reuse factory gasket and bolts for the mid-pipe

Weight:  22.5 lbs   (-20.21lbs)
Sound level:  98 dB(a) @ 5250 RPM

Dyno Chart
HP
:  +10.8 hp
TRQ:  +3  ft-lbs



*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138103
Price:
695.00Buy Now
IMAGES:
Mitsubishi Evolution X 2008-16

GPP RS Race Exhaust 

10138404
Car Make: Mitsubishi
Car Model: Evolution X
Car Year: 2008-16
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2008-14 Mitsubishi Evolution X is our most aggressive system for the turbocharged 4B11 and CZ4A chassis. The RS-Race is ideally suited applications, which require less sound suppression and maximum flow (or customers who just want an aggressive sounding exhaust.) This light-weight, large diameter, full stainless-steel 80mm (3.14”) non-tapered, cat-back exits the (right) passanger-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.
 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

Chassis:   CZ4A
Engine:   4B11 T
Type:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   80mm (3.14")
Tip:   115 mm (4.5")
Gasket(s):    80mm oval (qty: 1 included) replacement
 

Weight:  TBA lbs   (Stock weight  20.2 lbs)
Sound level:  101 dB(a) * without optional silencer
                        96 dB(a) with  50mm optional silencer (sold separately)

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138404
Price:
600.00Buy Now
IMAGES:
Mitusbishi Evolution X 2008-16

GReddy EVOlution GT Exhaust

10138300
Car Make: Mitusbishi
Car Model: Evolution X
Car Year: 2008-16
Notes:

The EVOlution GT for the Mitsubishi EvoX features full non-tapered 3” diameter piping with an aggressive dual angled muffler layout. The piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow This creates and improved performance and sound. The system is finished off with our classic Evo 115mm laser engraved GReddy tips. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis: CZ4A
Engine: 4B11T
Type: Cat-back system
(dual angled mufflers, with extended tips)


Number of pieces: 2pcs.
Piping: 76 mm (3")
Tip(s): 115 mm (4.5")
Gasket(s): 3" oval (qty: 1 included) replacement
Resonator: Yes

Notes: TBA

Weight: 28.9 lbs (stock 42.7lbs)
Sound level: 97 dB(a) @4500RPM

Dyno Chart
HP: 20 hp
TRQ: 10 ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10138300
Price:
1095.00Buy Now
IMAGES: